This Manual 5C TAIG Turn Lathe has 1/2″-20 lead screws, is factory assembled, wired up, and ready to go. It has a 1/4 hp spindle motor and comes with a 5C spindle headstock and 2 adjustable tool posts.
Ramblin' Dan’s Store (RDS) does not stock the TAIGTurn Lathe in local inventory. All machines are dropped shipped directly from the Taig Tools factory in Chandler, Arizona, USA. You will be receiving the latest factory fresh production.
Please note: Machine orders are transferred to Taig within 24 hours of receipt at RDS. Fullfillment and shipping from Taig is variable and can be 7 to 10 days to ship plus travel time. Some orders ship much faster. This lag is beyond control of RDS. Taig generally does NOT provide order tracking. RDS can determine when product ships from a billing notice.
Weight 90 lbs (with 5C Headstock)
Maximum spindle runout 0.0002 in. (5C)
X axis dovetails 45 deg.
Z axis dovetails 90 deg.
Leadscrews are 1/2″-20 on X & Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 1 5/8 in. bore multi-step belt (5C).
Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.
Travel in X axis 12 in. (Leadscrew)
Travel in Z axis 6 in.
Max Rapid travel per axis 75 in/min (Leadscrew)
Table dimensions 3 1/2 x 18.4 inches
4 spindle speeds 435-1800 RPM
SPINDLE (5C SPINDLE)
Spindle Runout less than .0002
Sealed precision ball bearing
Bearing OD 2.9528 in., ID 1.7717 in.
Spindle hole 1 1/8 in.
Spindle ID taper 10 deg (20 deg included)
Max. collet diameter 1 1/16 in.
Pulley size 1.625 in. bore.
Ball Bearings in all leadscrew bearing blocks